BDSTT - P-605-66 WASH PRIMER, PT A

  • MSDS: BDSTT
  • Manufacturer: KOPPER'S CO INC
  • Product Name: P-605-66 WASH PRIMER, PT A
  • National Stock Number: 8030-00-281-2726
Product Identification

Product ID:P-605-66 WASH PRIMER, PT A
MSDS Date:01/01/1985
FSC:8030
NIIN:00-281-2726
MSDS Number: BDSTT

Responsible Party
KOPPER'S CO.,INC.
3000 KOPPERS BLDG
PITTSBURGH, PA 15219-1818
US

Cage: LO123

Contractor
KOPPERS CO INC
PITTSBURGH, PA 15219-1818 US

Cage: 80592

Ingredients

N-BUTYL ALCOHOL

Fraction By Weight: 19.3%

ACGIH TLV: S,C,50 PPM


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 53%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


ZINC CHROMATE

CAS: 13530-65-9

RTECS: GB3290000

Fraction By Weight: 8.6%

OSHA PEL 0.1 MG/M3 (CRO3)

ACGIH TLV: 0.01MG/M3(CR)A1;9192


COPPER PHTHALO CYANINE BLUE

Fraction By Weight: 1.0%

ACGIH TLV: 0.1MG/CUM,MFR


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 6.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

Effects of Overexposure:HEADACHE, NAUSEA. EYES/SKIN:MODERATELY
IRRITATING.

First Aid

First Aid:REMOVE VICTIMS FROM VAPORS, RESTORE BREATHING IF
NECESSARY.SKIN:WASH W/SOAP & WATER. EYES:FLUSH W/WATER 15 MINS.
CALL MD.

Fire Fighting

Flash Point:63F,17C TOC
Lower Limits:1.4
Extinguishing Media:CO*2,FOAM OR DRY CHEMICAL
Fire Fighting Procedures:DO NOT USE WATER.
Unusual Fire/Explosion Hazard:VAPOR MAY FORM EXPLOSIVE MIXTURE BETWEEN
UPPER & LOWER EXPLOSIVE LIMITS.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. APPLY SAWDUST OR
OTHER ABSORBENT MATERIAL. KEEP MATERIAL FROM SPREADING. PUT IN
METAL CNTAINER & SEAL FOR DISPOSAL.

Handling

Handling and Storage Precautions:FLAMMABLE; STORE AWAY FROM OPEN FLAME
& HIGH HEAT. DO NOT TAKE INTERNALLY. AVOID PROLONGED CONTACT W/SKIN
& EYES. AVOID BREATHING VAPORS.
Other Precautions:PHYSICAL DATA:BP:82-118C. VAP PRESS:4.0(N-BUTYL
ALCOHOL)TO 33.0(ISOPROPYL ALCOHOL).ALSO CONTAINS 8.5% VINYL RESIN &
3.6% WATER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD RESP FOR EXPOSURE OF CONCERN.
Ventilation:ADEQUATE TO KEEP LOWER LEVEL BELOW LEL.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER SOLES MUST BE WORN(NO STATIC
ELECTRICITY).
Supplemental Safety and Health
CONFORMS TO MIL-P-15328C. PT A OF A 2 PART KIT. PT B IS T-152-66 ACID
COMPONENT, ALSO TO BE USED W/T-120-66 WASH PRIMER THINNER.
CONTAINER SIZE;0.8 FAL PER PKG.KEY1:F3.

Chemical Properties

HCC:F6
Boiling Pt:B.P. Text:180-244F
Vapor Density:>1.0
Evaporation Rate & Reference:<1.0, ETHER
Percent Volatiles by Volume:90.0

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO*2, ALDEHYDES & OTHER ORGANICS.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL,STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.